Software Toolbox Technical Blog

For users that have never worked with OmniServer, it can be intimidating thinking about how to take information out of a device manual or protocol document and convert that into an OmniServer protocol for your device. OmniServer makes this significantly easier, though, than alternatives such as custom code, especially once you're familiar with how OmniServer works and how to get started.

Continuing our Tech Support Corner blog series, this blog post covers six tips I know should help any relatively new users be successful getting OmniServer connected to your non-standard devices as quickly as possible.

If you're reading this, you likely have at least one Siemens S7 PLC on your network being used in your industrial process and need to integrate data from that process. And, like many of our Siemens users, you're likely interested in accessing symbolic references (versus the traditional Siemens variable addresses) supported by newer S7 controllers.

In this video blog, I'll show you how to get started using our Siemens S7 Plus Ethernet driver (part of the Siemens S7 Plus Suite) to connect and gather real-time process data from Siemens S7-1500 and S7-1200 PLC symbolic variables/tagnames for AVEVA Wonderware applications.

Do you find yourself in need of troubleshooting a TCP connection, but your IT department has everything locked down, so you're unable to install third-party Troubleshooting tools without permission? An often overlooked but effective tool for troubleshooting TCP socket connections is PowerShell.

Continuing our Tech Support Corner blog series, this blog post covers how to use PowerShell to effectively determine what issues you may be having with a problematic TCP Ethernet connection.

A key feature of any HMI package is the ability to not only show the current state of your control system, but to then store that information for historic purposes. But being able to easily access that historical data is key for making important decisions.

LGH File Inspector enables scalable, fast access to local daily historical data files (*.lgh files) logged by AVEVA InTouch™ HMI and SCADA applications without the limitations imposed by other solutions.

In this blog post, we'll cover how to seamlessly integrate LGH File Inspector with InTouch using InTouch scripting using two different methods.

If you're familiar with OmniServer, you likely already know how OmniServer is commonly used to retrieve information from devices that use ‘non-standard’ protocols to communicate such as weight scales, barcode readers, and printers either over serial connections or Ethernet connections.

But a common challenge is configuring an OmniServer but not having a real device physically available to test against. However, with a little extra configuration and a second PC with OmniServer installed, you can create a "device" version of the same protocol to test against.

Reviving our "OmniServer Did You Know?" blog series, I will cover how a second OmniServer can be configured to act as a test device for troubleshooting your protocol when a physical device isn't available.

TOP Server for AVEVA™ users are probably aware that TOP Server supports several methods for connecting AVEVA™ software solutions. TOP Server simultaneously supports SuiteLink, OPC DA Classic and OPC UA (as well as DDE for legacy applications). Users of AVEVA System Platform specifically commonly connect to TOP Server via either SuiteLink or OPC DA.

In this blog post, we will cover the basic steps to connect AVEVA System Platform to TOP Server via OPC DA, expanding connectivity options for AVEVA users. We'll also make our step-by-step quick start application note available for getting started.

The LGH File Inspector software solution enables rapid query and export of Wonderware InTouch LGH files to Excel & CSV for analysis and reporting. With Version 3.0, the licensing architecture has been redesigned for greater flexibility and ease-of-use.

In this blog post, we'll explain in more detail how the new licensing model benefits new and existing users.

Software Toolbox has a long-standing history of offering supplemental solutions that fit right in with AVEVA™ (formerly Wonderware®) projects. Many of you will be familiar with our TOP Server for AVEVA™ that offers a variety of device connectivity options, and a variety of client interface options like SuiteLink, OPC DA, and OPC UA.

SuiteLink is a communications protocol that runs over TCP/IP at the application layer, created by Wonderware to replace/succeed FastDDE, in the mid-1990's. Unlike OPC DA, SuiteLink doesn’t rely on COM or DCOM technology, making SuiteLink a common choice for remote connectivity to Software Toolbox solutions.

Continuing our Tech Support Corner blog series, this post shares best practices and procedures to follow when attempting to troubleshoot a SuiteLink connection, specifically when it comes to using SuiteLink clients with TOP Server. While this post specifically uses TOP Server as the SuiteLink server, the same techniques and concepts also apply to OmniServer, which also has a SuiteLink client Interface and is commonly used with AVEVA solutions.