Software Toolbox Technical Blog

2 min read

Connect Your Barcode Scanners to Barcode Printers

By Kevin Rutherford on May 28, 2020 2:00:00 PM

Barcode scanners and printers are devices that are very common in a variety of industries, whether it's for use in a manufacturing process or a multitude of other possible uses.  But how do you go from scanning a barcode to printing that barcode?

In this video, we will cover how to connect to both a Datalogic barcode scanner and a Zebra barcode printer, as well as, transferring the scanned barcode data to the printer automatically.

Continue Reading
8 min read

DataHub Enables Modular Procedural Automation at Air Liquide

By Win Worrall on Feb 20, 2020 2:00:00 PM


If you're unfamiliar with Modular Procedural Automation (MPA), it helps automate start-up, shutdown and other data-driven procedures in a process, increasing efficiency, optimizing production, and reducing wear and tear on equipment.  Additionally, MPA helps increase operator productivity and confidence.

Adapted from the case study in Control Magazine, this blog post covers how Air Liquide, a world leader in chemicals manufacturing, is migrating to MPA using OPC UA and OPC bridging to lower startup time by over 60% and increase production to over 500 additional tons of liquid oxygen (LOX) resulting in increased profitability.

Continue Reading
4 min read

Migration to State Based Control Increases Production via OPC UA

By Kevin Rutherford on Sep 5, 2019 2:00:00 PM


If you're unfamiliar with state based control, it's a process automation design that essentially defines that all process facilities should operate in a recognized, definable state with previously defined normal and abnormal conditions with defined actions for each.  State based control is intended to allow company's in virtually any process industry to greatly reduce factors of human error and inconsistency, significantly increasing the efficiency of all processes.

In this blog post, we cover how a large chemicals manufacturer migrated to state based control using OPC UA and increased their efficiency, production levels and profitability as a result.

Continue Reading
5 min read

Bridging the Gap between OPC, DDE, ODBC and Other Data Sources

By Win Worrall on Sep 7, 2017 2:00:00 PM


Do you need to directly connect data points or variables in different equipment, processes, or software? This concept is commonly referred to as ‘point-to-point bridging,’ and the DataHub bridging capability allows multiple data sources to communicate with each other in real time.

In this second post of our “I Can Do That?” blog series, we’ll help users like you get the most out of your DataHub by understanding the bridging feature in detail and how this feature can often be combined with other features to accomplish some very powerful automation tasks.

Continue Reading

Join Our Journey

Working in industrial automation since 1996, the Software Toolbox team has seen a lot. The level of automation system sophistication of our integrators and users has evolved, each driven by the demands of their market and clients.  Everyone's learning continues as technological change accelerates.

This blog is about sharing from these journeys.  From tips on implementing software, successes our clients have experienced, or new ideas and things to consider in your journey, we'll be sharing them here.

Subscribe to our Blog

Recent Posts

Posts by Topic

See all