Software Toolbox Technical Blog

A common use case that we encounter with many AVEVA™ users is the need to share data from System Platform with some other client or system (HMI, SCADA, other). It's not uncommon for a company to be acquired by another company and its assets and a non-AVEVA HMI/SCADA came as part of the assets.  Or perhaps a system is being add with limited interfaces for external connectivity.  Your options for sharing data largely depend on what software interfaces these "other systems" support.

In this blog post, I'll discuss how to share your AVEVA System Platform 2020 (or newer) data via OPC UA (without using OI Gateway) using the OPC Router for situations where you have another non-OPC UA capable client application that needs access to process data in your AVEVA system such as an ERP system, IIoT platform, web service and more.

If you’re reading this post, you’ve almost certainly at least heard of DCOM. And, possibly, you’re one of many who have struggled over the years with the trials of configuring remote OPC Classic connections between machines where DCOM inevitably increased your time and difficulty for what should be a relatively painless task.

DCOM Hardening is Permanent in 6d 1h 34m 0s

DCOM hardening with no option to disable it is coming up fast - March 14, 2023. If you haven't already made a plan to either migrate away from DCOM communications entirely or address how to keep your process systems that will still rely on remote OPC Classic over DCOM working reliably, time is running out. Downtime is costly and a system that is using OPC Classic and hasn't been evaluated to determine the effects of DCOM hardening could be vulnerable to communication breaks.

This blog post discusses 6 types of options to relieve DCOM hardening pain. These include alternatives to DCOM that cover a range of use cases depending on what software you already have installed and your existing system architecture. We also have a comprehensive guide that you'll be able to request that addresses what DCOM changes will be needed if you're not in a position to migrate currently.  Our technical support team are also willing to discuss your specific requirements with you, so you're not on your own out there! 

Software Toolbox Products DCOM Readiness and Action FAQs

Are you or have you ever been in a situation where you were working with both an AVEVA™ solution and some other client or system (HMI, SCADA, other) and needed to share data?  Perhaps your company acquired another company and its assets and a non-AVEVA HMI/SCADA came as part of the assets.  Or perhaps your company merged with another and now your AVEVA system is expected to integrate with other systems.  Your options for sharing data largely depend on what software interfaces these "other systems" support.

In this blog post, I'll discuss how to share your AVEVA System Platform 2020 (or newer) data via OPC UA (without using OI Gateway) using the Cogent DataHub® for situations where you have another non-OPC UA capable client application that needs access to process data in your AVEVA system.

For users that have never worked with OmniServer, it can be intimidating thinking about how to take information out of a device manual or protocol document and convert that into an OmniServer protocol for your device. OmniServer makes this significantly easier, though, than alternatives such as custom code, especially once you're familiar with how OmniServer works and how to get started.

Continuing our Tech Support Corner blog series, this blog post covers six tips I know should help any relatively new users be successful getting OmniServer connected to your non-standard devices as quickly as possible.

As you may be aware, Wireshark is an incredibly useful freeware tool for capturing network traffic on a computer. Our support engineers find it to be invaluable for troubleshooting Ethernet communications issues, as it provides visibility into more than just the protocol data packets, including handshaking calls and responses.

Wireshark also provides options for specifying capture filters (for defining a smaller subset of data to be captured that you're interested in) or you can capture all traffic and apply a display filter to narrow down the traffic that is visible.

Continuing our Tech Support Corner blog series, this blog post covers how to go even further using Wireshark by defining scripted custom Wireshark captures for specific use cases, which is helpful for capturing infrequent issues without wasting a lot of unnecessary hard drive space.

Do you find yourself in need of troubleshooting a TCP connection, but your IT department has everything locked down, so you're unable to install third-party Troubleshooting tools without permission? An often overlooked but effective tool for troubleshooting TCP socket connections is PowerShell.

Continuing our Tech Support Corner blog series, this blog post covers how to use PowerShell to effectively determine what issues you may be having with a problematic TCP Ethernet connection.

Great job! You managed to configure Cogent DataHub® to fit your needs, and now you are ready to run it in a production environment, but you are left with one question – “How in the world do I run DataHub as a service?”.

Running applications as Windows services has multiple benefits but, perhaps, the most beneficial reason to run an application as a service is the ability to let the application/process run in the background without the need for a user to be logged on the operating system. For that reason, this might be why you are looking at how to run it as a service, whether you are tunneling, logging, aggregating, historizing data, and/or using Datahub as a Gateway.

Continuing our Tech Support Corner blog series, if you find yourself in this situation like other users over years, do not worry. This post will walk you through the process of running DataHub as a service as well as how to access its properties from a local and/or remote machine.

TOP Server for AVEVA™ users are probably aware that TOP Server supports several methods for connecting AVEVA™ software solutions. TOP Server simultaneously supports SuiteLink, OPC DA Classic and OPC UA (as well as DDE for legacy applications). Users of AVEVA System Platform specifically commonly connect to TOP Server via either SuiteLink or OPC DA.

In this blog post, we will cover the basic steps to connect AVEVA System Platform to TOP Server via OPC DA, expanding connectivity options for AVEVA users. We'll also make our step-by-step quick start application note available for getting started.